What Our Customers Are Saying about Us?

Gurnee Refrigerator Moving

Refrigerator Moving The first piece of equipment for moving an appliance or other heavy items is a dolly. The dolly is the basic equipment for moving refrigerator. Make sure the dolly is long enough to accommodate all heavy items, including the refrigerator and all of its components. Also, be prepared with at least three people to help lift the refrigerator. Other moving supplies needed are: heavy-duty tape, rope, dolly, and non-slip mats.

Refrigerator Moving With your dolly, start at the bottom of the appliance and work your way up. Have someone on the dolly who knows how to move a refrigerator. Otherwise, ask for assistance from one of the employees at your local home depot store. Be very careful when lifting the top of the refrigerator, since you could damage the inside and even possibly destroy its coolant. Once the top is off, remove the doors and the door frame, as well as the trim around the edges.

JC Movers & Lumper Service lnc: Refrigerator Moving in Gurnee

Refrigerator Moving If you’re moving a refrigerator, you may need a little extra help than if you’re just moving a regular appliance. Refrigerator moving can be dangerous, so it’s wise to consider safety when doing it. For one thing, if the refrigerator is extremely heavy, you’ll need extra manpower to move it. Plus, the walls and the cooling fan and wiring are delicate pieces of property. For another thing, you don’t want to damage any of these vital pieces of equipment with careless moves.

We’re Open. Call Today! (877) 745-3646

Refrigerator Moving When moving a refrigerator, movers can create some additional property damage in addition to the actual move itself. Heavy furniture and other large items may knock over shelves, knock over cooling vents and wires, and even hit the walls. Moving a large appliance this way is extremely dangerous, and it certainly isn’t a good idea. In fact, any moving, large appliance should always be left behind when it’s moved.

Get a PRICE Quote cost for Gurnee, IL Refrigerator Moving

Refrigerator Moving and Defrost If you move a refrigerator, it means it has defrosted – which means it has a freezer full of cold stuff. The problem is that refrigerators don’t last forever. A fridge can go bad even with the best care, or be left in the sunlight or completely exposed to snow, rain or heat without a proper defrost cycle. If your fridge has already defrosted to the point that it’s not working properly, there are still steps you can take to make it easier to get your groceries in your new place.

Best Refrigerator Moving in Gurnee, Illinois

Start by Uncovering the Basics. You should always unplug a refrigerator from the wall or floor before moving it, so that you can free up the space under the appliance and do the job right. Then, find all the wires and remove the negative cable. You’ll find that there is a tab on the back called “hinge strap”, which you’ll need to undo using the supplied ratchet straps. You can now access the three main parts of the fridge shelves (the freezer, motor and refrigerator door) by sliding the tabs off. After removing these, you’ll see that the freezer is free and clear of all the blocks that keep it in place.

Gurnee Refrigerator Moving Near Me

Use the Right Equipment. While it’s possible to try to do this job without any special tools or expertise, it’s nearly impossible to do it right without the right equipment. For one, you’ll need electrical tape to seal the walls and cover the storage areas, as well as ratchet straps and some strong tape. You’ll also need at least two people just in case one of the moving straps breaks, or the truck itself gets tipped over.

Affordable Nearby Refrigerator Moving 60031

Move Your Refrigerator dolly back in place, using the moving straps and ratchet straps. After securing the entire unit back in place, secure the electrical tape around the inside of the refrigerator door, and you’re done! A well-secured refrigerator, that you’ve put together yourself, should last for many years. If the refrigerator gets damaged somehow, simply replace the broken moving straps with new ones and your project is complete.